Category How does It works, How things work, How is it done, Curiosity

Water trucks are a vital part of mining and construction operations. Dust control, compaction, even fire prevention are among the uses of these powerful machines. Water trucks are different from regular trucks in that they have special tank specifications, custom chassis design and mounting apparatuses, and associated pumping equipment.

Water trucks come in a range of sizes and designs, with larger trucks able to haul as much as 36,000L. Some are even specially designed for mining applications and come with off-road tyres, safety equipment and are reinforced for stability over rugged terrain.

The spraying and filling capabilities also vary from truck to truck, depending on the purpose. For starters, filler pipes are typically mounted on the truck’s near side or via an opening on top of the tank. As for spaying capabilities, spray nozzles can be situated on the front, side and/or rear of the truck, and are typically controlled from inside the driver’s cab. There are also drip bars, hose reels, water cannons and more.

Picture Credit : Google

Basically, a garbage truck is a machine that making our waste squeeze and minimize the space that trash take.
A garbage truck that aims to reduce the size of your waste on landfills works easily. The garbage thrown into the garbage compactor is divided into small and collectible pieces with a metal mallet, then these garbage pieces are collected in groups in a bag or compacted.

Garbage trucks produced for the purpose of cleaning neighborhoods, streets, and cities are used by garbage disposal workers to clean the places we live in. The garbage collected by the sanitation engineers is loaded into the back of the garbage truck or the garbage containers are transported by the garbage machines and dumped into the back chamber of the garbage truck.

Later, the garbage loaded into the rear chamber of the truck is pushed to the middle part of the garbage truck by hydraulic cylinders. The press assembly at the rear of the truck shreds or compresses the waste. Later, when the garbage truck is full, the garbage collectors take it to waste collection centers. During unloading, the rear of the truck lifts up and the garbage is discharged from the rear chamber of the truck, accompanied by a hydraulic cylinder.

Picture Credit : Google

A tow truck (also called a wrecker, a breakdown truck, recovery vehicle or a breakdown lorry) is a truck used to move disabled, improperly parked, impounded, or otherwise indisposed motor vehicles. This may involve recovering a vehicle damaged in an accident, returning one to a drivable surface in a mishap or inclement weather, or towing or transporting one via flatbed to a repair shop or other location.

Tow trucks are vehicles specially designed to take other cars or vehicles and bring them to another location. They are usually operated by private businesses or emergency services, depending on their intended use. Tow trucks can be used in accident recovery or vehicle repossession. Oversized tow trucks are typically used to haul several cars for transport or move even bigger vehicles such as aircraft and fire trucks.A tow truck works depending on the style of truck and their purpose. For emergency services, a tow truck could either be a flat-bed, wheel-lift, or a hook-and-chain truck.

The flatbed trucks are as the name implies: they are equipped with a large, flat surface on the back. Flat bed tow trucks have a pulley system that attaches underneath the front or back of the car. The bed would be angled down to form what looks like a ramp. As the tow truck driver actuates the pulley, the car is drawn onto the flat bed. The driver levels the bed out and secures the vehicle by the wheels onto the truck.

For the hook-and-chain tow truck, a boom is attached to the back of the tower’s vehicle. A chain with a hook at the end hangs from the boom. The tower can adjust the boom and the chain as needed. The chains and/or hook would be attached to the vehicle’s axle. The boom would lift the vehicle up and place the front wheels onto a rubberized area on the back of the truck, while the back wheels are free on the road.

Wheel-lift trucks are often used in repossessions because of their compactness and have less ability to damage a car. Wheel-lift tow trucks have a deployable attachment called a yoke on the back that touches only the wheels of the towed car. When activated, the yoke can be positioned under the front or rear wheels. The truck lifts the front or back of the car off the ground.

Picture Credit : Google

Escalators are one of the largest, most expensive machines people use on a regular basis, but they’re also one of the simplest.

At its most basic level, an escalator is just a simple variation on the conveyer belt. A pair of rotating chain loops pulls a series of stairs in a cons­tant cycle, moving a lot of people a short distance at a good speed.

The core of an escalator is a pair of chains, looped around two pairs of gears. An electric motor turns the drive gears at the top, which rotate th­e chain loops. A typical escalator uses a 100 horsepower motor to rotate the gears. The motor and chain system are housed inside the truss, a metal structure extending between two floors.

Instead of moving a flat surface, as in a conveyer belt, the chain loops move a series of steps. The coolest thing about an escalator is the way these steps move. As the chains move, the steps always stay level. At the top and bottom of the escalator, the steps collapse on each other, creating a flat platform. This makes it easier to get on and off the escalator. In the diagram below, you can see how the escalator does all of this.

Each step in the escalator has two sets of wheels, which roll along two separate tracks. The upper set (the wheels near the top of the step) are connected to the rotating chains, and so are pulled by the drive gear at the top of the escalator. The other set of wheels simply glides along its track, following behind the first set.

Picture Credit : Google

Cranes combine simple machines to lift extremely heavy objects. In balance-style cranes, the crane’s beam is balanced at a point, called the fulcrum. This allows it to lift heavy objects with a relatively small force. In this way, the crane’s beam acts as a simple lever. Cranes also make use of the pulley, another simple machine. Tower cranes often have more than one pulley. This helps it multiply its force to lift heavy objects.  

Cranes exist in an enormous variety of forms, each tailored to a specific use. Sizes range from the smallest jib cranes, used inside workshops, to the tallest tower cranes, used for constructing high buildings. Mini-cranes are also used for constructing high buildings, in order to facilitate constructions by reaching tight spaces. Finally, we can find larger floating cranes, generally used to build oil rigs and salvage sunken ships.

Some lifting machines do not strictly fit the above definition of a crane, but are generally known as cranes, such as stacker cranes and loader cranes.

Picture Credit : Google