Category Scientist & Invensions

When the guns were first made?

            A gun is a weapon that fires bullets from a tube called a barrel. First some explosive is filled then the bullet is placed inside the barrel. A spiral groove cut in the gun barrel make the shells spin as they flow through the air. When the explosive is ignited, it produces large amounts of hot gases. These hot gases expand very quickly and hit the bullet. The force brings out the bullet from the barrel at a very high speed. Although it cannot be accepted as proven, it is believed that the earliest guns were manufactured both in China and in North Africa in 1250 AD.

            The earliest representation of an English Gun is contained in an illustrated manuscript dated 1326 AD available in an Oxford Library.

            The heavy cannons were first used in about 1350 AD. They were mounted on a wooden support. A gunner placed some gunpowder in the open end of the barrel, called the muzzle. He then rammed it down deep into the closed end called the breech. Then he put a cannon ball next to the powder into the barrel. The gun was fired by placing a lighted wick into a hole in the breech. The wick ignited the gunpowder and the cannon were fired. Sawai Jai Singh, the ruler of Jaipur, commissioned cannon on wheels in 1720 which is the largest cannon on wheels in the world. Named as Jaivana, this had a 20 ft. long barrel and weighed 50 tonnes; it required 100 kg gunpowder for a single shot and had a range of 35 km.

            During the 16th century, pistols and other sorts of guns became common but all these were loaded from the muzzle. In 1800 came guns which fired pointed shells that exploded when they hit their targets. During the 19th century, a different kind of gun was invented. This gun was loaded from the back and instead of a metal ball, cartridges were used in it. The cartridges were placed near the back of the gun.

            A cartridge has a metal or paper tube containing a bullet and some powder. This was enclosed by a cap. The cap lies at the back of the cartridge. It contains a small amount of explosive. This explosive is very sensitive and is exploded by striking it with a firing pin. This explosion gives a jolt to the bullet and it comes out. By the 19th century, breech loading rifles and pistols were in general use.

            In 1835, an American inventor, Samuel Colt invented a pistol which when fired threw out a revolving bullet. So, he called it a revolver. It contained a chamber that held five or six cartridges. When the trigger was pulled, the chamber turned round and lined up a cartridge with the barrel. Modern revolvers are very similar to those made by Colt.

            During the 19th century, rifles became popular. Now they came to be fitted with magazines to hold cartridges. These rifles had a bolt beside the breech. These rifles were used on a very large scale during the two World Wars. Inventors developed Muskets Rifles and machine guns for long distance shooting during the end of 2nd World War.

            These were automatic light guns that kept on firing bullets as long as the trigger was pressed. After this, heavy guns known as field guns were developed. Modern field guns weigh about four tonnes. Shells used in these weigh about 40 kg and have a range of about 14 km. The barrels are made of the highest grade of steel and these guns are very expensive. In modern guns a hammer set off an explosion that drives a shell or bullet from the barrel.  

Vijay Bhatkar

Vijay P. Bhatkar is an Indian computer scientist, IT leader and educationalist. He is best known as the architect of India’s national initiative in supercomputing where he led the development of Param supercomputers. He is a Maharashtra Bhushan, Padma Shri, Padma Bhushan awardee. Indian computer magazine Dataquest has placed him among the star pioneers who shaped India’s IT industry. He was the founder executive director of C-DAC and is currently working on the developing Exascale supercomputing mission for India.

Known for

  • Architect of PARAM series of Supercomputers

Awards

  • Padma Shri
  • Padma Bhushan
  • Maharashtra Bhushan

Institutes

  • Indian Institute of Technology Delhi
  • Maharaja Sayajirao University of Baroda
  • Visvesvaraya National Institute of Technology

To Read more about Vijay Bhatkar  Click Vijay Bhatkar 

Harish-Chandra

Harish-Chandra (11 October 1923 – 16 October 1983) was an Indian American mathematician and physicist who did fundamental work in representation theory, especially harmonic analysis on semisimple Lie groups.

Fields

  • Mathematics
  • Physics

Institutions 

  •    Indian Institute of Science
  • Harvard University
  • Columbia University
  • Tata Institute of Fundamental Research
  • Institute for Advanced Study

Awards

  • Fellow of the Royal Society
  • Cole Prize in Algebra (1954)
  • Srinivasa Ramanujan Medal

To read more about Harish-Chandra click Harish-Chandra?

Sivaraj Ramseshan

Sivaraj Ramseshan (October 10, 1923 – December 29, 2003) was an Indian scientist known for his work in the field of crystallography. Ramaseshan served as Director of the Indian Institute of Science and was awarded the Padma Bhushan. Ramaseshan is the nephew of Indian scientist and Nobel laureate Sir C. V. Raman and cousin of Subramanyan Chandrasekhar.

Fields

  • Physics

Institutions

  • Indian Institute of Science
  • Indian Institute of Technology

Awards

  • Padma Bhushan

As scientist

On completion of his doctorate, Ramaseshan joined the Indian Institute of Science as a lecturer. During this time, he developed an interest in X-ray crystallography and was instrumental in improving the material science division in the National Aerospace Laboratories. Ramaseshan also taught as a professor in the Indian Institute of Technology.

To read more about Sivaraj Ramseshan Click S. Ramseshan

Ravi Sankaran

Ravi Sankaran (October 4, 1963 – January 17, 2009) was an Indian ornithologist whose work concerned the conservation of several threatened birds of India. He was the Director of the Salim Ali Centre for Ornithology and Natural History, Coimbatore, Tamil Nadu. Ravi studied at the Rishi Valley School, Madanapalli, Andhra Pradesh; obtained a Bachelor of Science degree in Zoology from Loyola College, Chennai and a doctorate from Bombay Natural History Society Ravi joined the Bombay Natural History Society (BNHS) in 1985 in the endangered species project on the great Indian bustard (Ardeotis nigriceps) and florican species (family Otididae) and played a role in developing recovery plans for these species. He also established Florican Watch, involving local people.

Ravi Sankaran studied several endangered birds of the Andaman and Nicobar Islands. His work on the Narcondam hornbill, Nicobar megapode and the edible-nest swiftlets aided the development of conservation management of these species. Ravi was also involved in a project Strengthening community conservation efforts in Nagaland: a programme to impart technical support on biodiversity conservation and livelihood options to communities, a collaborative programme between the Nagaland Empowerment of People through Economic Development, Kohima (NEPED), and SACON, in collaboration with other organisations such as Kalpavriksh, Pune; Ecosystems India, Guwahati; Aranayak, Assam; ATREE, Bangalore; and Nature Conservation Foundation, Mysore.funded by Sir Dorabji Tata Trust, Mumbai.

Awards

  • WTI Endangered Species Award-2004

To know more about Ravi Sankaran click Ravi_Sankaran

Giridhar Madras

Giridhar Madras is an Indian professor at the Indian Institute of Science, Bangalore, India.

Education

Madras speaks four languages, English, Hindi, Tamil, and Kannada. Madras received his chemical engineering degree from Indian Institute of Technology at Madras in 1990. He obtained his Ph.D. degree in chemical engineering from Texas A&M University, United States, in 1994. Subsequently, he worked in the University of California at Davis, USA. He returned to India as an Assistant Professor of chemical engineering at the Indian Institute of Science, Bangalore in 1998.

Fields

  • Chemistry

Awards

  • Scopus Young Scientist Award from Elsevier for being the most cited young author in engineering
  • Presidential Swarnajayanthi fellowship by the Department of Science and Technology, India, 2006
  • Shanti Swarup Bhatnagar prize from CSIR, India, 2009
  • J.C. Bose National fellowship, 2014

To know more about  Giridhar Madras CLICK Giridhar Madras