Category Everyday Science

An electrical circuit is a loop around which electrical energy can move. Electricity travels from a power source, such as a battery, through wires, and back to the power source. In a simple circuit, other useful items that make use of the electricity, such as a bulb or a buzzer, are added. Electricity can only flow when there is a complete circuit.

Battery

A battery stores electrical energy and releases it when connected to a circuit. The battery will eventually run down and will have to be replaced.

Switch

A switch allows the bulb to be turned on or off without removing the battery. When the switch is closed, the circuit is complete and the bulb lights up.

Wires

Electricity flows around the circuit through a series of wires. Wires are usually made of copper, as copper is a good conductor of electricity.

Bulb

As electricity flows through the bulb, the electricity energy is converted to light energy, and the bulb glows brightly.

Conductors and Insulators

Conductors allow electricity to flow easily through them. Metals, such as copper, are good conductors of electricity. Electrical wires are made of metal so electricity can flow easily through them. Insulators do not let electricity pass through them. Plastic, rubber, and wood are good electrical insulators. Wires are coated in plastic to prevent you from getting an electric shock if you touch them.

Switching on!

Many electrical items do not need batteries as they can be plugged into the mains, using a long wire. Once they have been plugged in, these items are usually turned on by passing a switch, which completes the electrical circuit.

 

Picture Credit : Google

Glaucoma is a group of eye conditions that damage the optic nerve, the health of which is vital for good vision. This damage is often caused by an abnormally high pressure in your eye. Many forms of glaucoma have no warning signs. The effect is so gradual that you may not notice a change in vision until the condition is at an advanced stage.

Glaucoma is the result of damage to the optic nerve. As this nerve gradually deteriorates, blind spots develop in your visual field. For reasons that doctors don’t fully understand, this nerve damage is usually related to increased pressure in the eye.

Glaucoma tends to run in families. In some people, scientists have identified genes related to high eye pressure and optic nerve damage. Promptly go to an emergency room or an eye doctor’s (ophthalmologist’s) office if you experience some of the symptoms of acute angle-closure glaucoma, such as severe headache, eye pain and blurred vision.

 

Picture Credit : Google

Lakes in cold region freeze in winter. What happens to the fish and other animals living in the lake?

A lake may freeze when it is very cold but fortunately for the fish and other animals living in it, it freezes only at the surface. The water below the surface remains unaffected. This happens because of the odd behaviour of water. Like any substance water also contracts and becomes denser as it cools; but once it cools to 4  its behaviour changes. Below 4  water actually starts becoming lighter. At 0 , water freezes to ice. Ice is lighter than water and it floats on water. The ice layer insulates the water below from the cool air above. This keeps the water below the surface, warm and in liquid state.

 

Picture Credit : Google

My friend had a small magnet and he warned me not to use it to pull things towards it too often as that would exhaust its magnetic powers.

Can a magnet become demagnetized by overuse?

In materials like iron, the atoms themselves are little magnets. In the natural or neutral state, these atoms all point in different directions. In a magnet, the atoms all point in the same direction.

To de-magnetise a magnet, the alignment of the atoms needs to be disturbed in such a way that they are pointing randomly in different direction, as in the neutral metal. This can be done in either of three ways:

(a) by heating the magnet over a gas flame.

(b) by hammering it for a few minutes, or

(c) by dropping the magnet from a height of over 100 ft.

The magnet cannot lose its magnetic properties due to over use.

 

Picture Credit : Google

The electric train gets electricity from an overhead wire. But how does a train running underground obtain electricity? The electric train has a device called a pantograph through which it draws electricity from a live wire above the tracks. In a suburban train 3 or 4 pantographs are used to run electric motors located in various compartments.

But in many underground train systems, the current is not obtained from an overhead wire. Instead, a third rail that runs parallel to the existing two, is laid and charged with electricity. The train picks up electricity from this track. This is done to reduce the height of the tunnel. In India, the Calcutta metro railway is an example of such an arrangement. Abroad, it is used in the London Underground.

 

Picture Credit : Google

My friend says his uncle has invented a machine that once started can run forever without any assistance or additional energy. Are there such machines?

Many scientists have tried to build perpetual motion machines but without success. The force of friction ultimately brings every moving thing to a stop. So far the only machine that comes close to being a perpetual motion machine, is an artificial satellite circling the earth. It circles the planet for years but ultimately friction with dust particles slows it down and it falls into the upper atmosphere where t burns up.

 

Picture Credit : Google